This tutorial has been updated for Hog4.
The complete Quick Start Guides are also available in PDF form below.
Hog QuickStart: Recording Cues

Recording Cues to a Master
1. Create the desired look in your Programmer
2. Press RECORD
3. Press CHOOSE on the master you wish to record to
HINT: If the Master you wish to record to is already chosen, you can simply press ENTER after pressing RECORD
Follow the same procedure to add subsequent Cues to the same Cuelist
Inserting a cue within a cuelist
Assuming your Master is chosen…
1. Create the desired look in your Programmer
2. Press RECORD Cue # (Example: RECORD 1.5) ENTER
HINT: Sometimes you don’t want the values from the Cue you are inserting to Track into the following cue. To avoid this: Assuming your Master is chosen…
1. Create the desired look in your Programmer
2. Press RECORD
3. De-select FORWARD from the Record toolbar (bottom of the right monitor)
4. Type in the number of the cue you would like to store, followed by ENTER
To Delete Cues on the Chosen Master
1. Press CUE, type in the # of the cue you wish to remove
2. Press DELETE
3. If prompted to confirm, press OK or hit ENTER Note: you can select a range of cues to delete (Example: CUE 1 THRU 10 DELETE ENTER)
To Delete Cues not on the Chosen Master or Cues in Virtual Cuelists
1. Press LIST followed by the # of the Cuelist containing your cue
2. Press CUE, type in the # of the cue you wish to remove
3. Press DELETE
4. If prompted to confirm, press OK or hit ENTER
Note: you can select a range of cues to delete (Example: LIST 9 CUE 1 THRU 10 DELETE ENTER)
To Delete a Cuelist
1. Press LIST followed by the # of the List you wish to remove
2. Press DELETE
3. If prompted to confirm, press OK or hit ENTER
To Copy Cues on the Chosen Master
1. Press CUE, type in the # of the cue you wish to copy
2. Press COPY
3. Press CUE followed by the destination cue, then ENTER
Note: you can select a range of cues to copy (Example: CUE 1 THRU 10 COPY CUE 11 ENTER)
To Copy Cues not on the Chosen Master or between Cuelists
1. Press LIST followed by the # of the Cuelist containing your source cue
2. Press CUE, type in the # of the cue you wish to copy
3. Press COPY
4. Press LIST followed by the number of the destination Cuelist
5. Press CUE followed by the destination cue, then ENTER
Note: you can select a range of cues to copy (Example: LIST 9 CUE 1 THRU 10 COPY LIST 42 CUE 1 ENTER)
To Copy a Cuelist
1. Press LIST followed by the # of the List you wish to copy
2. Press COPY
3. Press the CHOOSE key of the destination Master or Select an empty cell in the Cuelist Directory
-
18 in 2018- Day Eighteen: Layout Feedback
-
18 in 2018- Day Seventeen: Importing and Exporting Fixture Profiles
-
18 in 2018- Day Sixteen: Temporary Look Storage
-
18 in 2018- Day Fifteen: Where the Heck is that Sequence?
-
18 in 2018- Day Fourteen: Export A Printable Patch
-
18 in 2018- Day Thirteen: Encoder Wheel Shortcuts
Similar posts
-
18 in 2018- Day Eighteen: Layout Feedback
18 Tips in 2018grandMAMA2 ProgrammingMA2 SoftwareMA2 Training VideosOrganization -
18 in 2018- Day Seventeen: Importing and Exporting Fixture Profiles
18 Tips in 2018grandMAMA2 ProgrammingMA2 SoftwareMA2 Training VideosOrganization -
18 in 2018- Day Sixteen: Temporary Look Storage
18 Tips in 2018grandMAMA2 ProgrammingMA2 SoftwareMA2 Training VideosOrganization